Description
Description:
This high torque steel geared servo is also high voltage. Now you can run an unregulated LiPo battery for extreme torque! The SC-1268SG is the high torque servo you always dreamed of. Best used for 1/8th scale nitro racing and can push 347.2 oz. of torque.
Features:
- Combines leading edge technology with super high 12 bit (4096) resolution.
- Higher performance due to increased voltage and improved technology
- Incredible torque
- Increased transit speed
- Increased efficiency
- Water resistant with 4 silicon seals implanted
- Strong and precise-made steel gears
- Suitable for 1/8th nitro racing and large scale aircraft, 600 and 700 class helicopters.
Dimensions(mm): 40.3×20.2×37.2
Weight(g): 62.0
Speed(@4.8V sec/60): .15
Torque(@4.8V oz-in): 160.0
Speed(@6.0V sec/60): .13
Torque(@6.0V oz-in): 208.3
Speed(@7.4V sec/60): .11
Torque(@7.4V oz-in): 347.2
Gear: Unique Steel
Bearing: 2BB
Case: Aluminum
25 Tooth Spline
Technical Specs
Dimensions(mm): 40.3×20.2×37.2
Weight(g): 62.0
Speed(@4.8V sec/60): .15
Torque(@4.8V oz-in): 160.0
Speed(@6.0V sec/60): .13
Torque(@6.0V oz-in): 208.3
Speed(@7.4V sec/60): .11
Torque(@7.4V oz-in): 347.2
Gear: Unique Steel
Bearing: 2BB
Case: Aluminum
Running current (at no load): 100 mA @ 4.8V
Running current (at no load): 120 mA @ 6.0V
Running current (at no load): 150 mA @ 7.4V
Stall current (at locked): 2500 mA @ 4.8V
Stall current (at locked): 3000 mA @ 6.0V
Stall current (at locked): 3500 mA @ 7.4V
Idle current (at stopped): 5 mA @ 4.8V
Idle current (at stopped): 5 mA @ 6.0V
Idle current (at stopped): 5 mA @ 7.4V
Limit angle: 200°±10°
Connector wire gauge: ＃22 AWG
Connector wire length: 200 ±5 mm
Horn gear spline: 25T
Control system: Pulse width modification
Amplifier type: Digital Controller
Operating Travel: 100° (when1000→2000 μsec)
Neutral position: 1500 μsec
Dead band width: 3 ~ 5 μsec
Rotating direction: Counterclockwise (when1000→2000 μsec)
Pulse width range: 800→2200 μsec
Maximum travel: Approx 130°(when900→2100 μsec)
Reviews
There are no reviews yet.