Octura Strudder Package is designed for 22-30cc gas engines installed in deep vee hulls – This strudder allows the cable to be brought out the back of the boat (surface drive application) instead of the bottom. (submerged application)
It comes with the OC8SBES Strut Blade (which has a 45 degree back sweep) with 2-OC10RB916 reducers and 4-OC8LTS lead teflon sleeve bearings installed – 1/4 in. diameter prop shaft with OC8DT tapered drive dog and OC8PNM tail nut – CFSF916 flex ferrule – 4-nylon thrust washers and offset rudder (with water pick-up tube extruded in the rudder with a water pick-up machined on the right side) all mounted in the back hole of our standard extruded aluminum mounting bracket.
Comes also with 2 ft. of 1/4 in. flex cable (standard left lay) with one squared and 2 ft. of matching teflon tubing. (NOTE: Flex ferrule and flex cable are not joined together) This package is designed with the serious racer in mind- the offset rudder makes the boat very maneuverable on a race course-making right hand turns is what this strudder is designed for.