MGM TMM 40063-3 for Multicopters X2-SERIES PRO Speed Control USD$964.00
MGM TMM 14063-3 for Multicopters X2-SERIES Speed Control USD$419.85USD$694.00
Available on backorder
Compare| Weight | 3 lbs |
|---|---|
| Dimensions | 16 × 4 × 4 in |
| Empty batt. behaviour – instant motor cut-off | Yes |
|---|---|
| Setting of the range of neutral zone | Yes |
| Possibility of switching reversible controller into “one-way” mode | Yes |
| Reversible controller (both-way mode) | Yes |
| Bidirectional “both-way” mode | Yes |
| ACL – Automatic Current Limiting | Yes |
| ACR – Automatic Current Reduce | Yes |
| Temperature fuse of the controller | Yes |
| Current fuse of the controller | Yes |
| False-start protection | Yes |
| Masking of interference | Yes |
| Software reversal of rotation | Yes |
| Empty batt. behaviour – motor power reduction | Yes |
| Adjustable deceleration speed | Yes |
| Adjustable acceleration speed | Yes |
| External signalization of important states | Yes |
| Possibility of connecting plane position lights and flashing lights | Yes |
| Active free-wheeling circuit ON / OFF | Yes |
| Possibility of automatic setting of throttle limits | Yes |
| Possibility of manually set timing | Yes |
| Automatically set timing | Yes |
| Manually set type of cells | Yes |
| Possibility of manually set number of cells | Yes |
| Possibility of automatic setting of cut off voltage | Yes |
| Possibility of setting switching off voltage | Yes |
| Possibility of setting an amount of residual energy for BEC | No |
| Possibility of setting the voltage of BEC | No |
| Possibility of very powerful switching BECs | No |
| Possibility of setting current limits | Yes |
| Possibility of setting RPM limits | Yes |
| Possibility of motor temperature measuring | Yes |
| Possibility of cells temperature measuring | Yes |
| Outstanding cells management | Yes |
| Very high resistance against overloading | Yes |
| Plug and Play (functional immediately without the need for additional programming) | Yes |
| ICS-2 connector – super-fast PC connection link | Yes |
| Programming using PC | Yes |
| Reading-out of data from the controller using PC | Yes |
| Software updates available through internet | Yes |
| Telemetry (back data transfer) | Yes |
| Real-time Monitoring (PC or other device) | No |
| Internal Data Logger (data recorder) | Yes |
| Possibility of design with ON/OFF switch (connected safely) | Yes |
| Possibility of WR version (full protection against water) | Yes |
| Possibility of WP version (increased protection against water) | Yes |
| Possibility of design with external heatsinks + FAN | Yes |
| Possibility of design with water-cooled heatsinks | Yes |
| Possibility of design with external heatsinks | Yes |
| Length of the servocable | 190 [ mm ] |
| Servocable cross-section | 0.25 [ mm2 ] |
| Length of the power conductors | see guide [ mm ] |
| Power conductors cross-section to batt. / to mot. | see guide [ mm2 ] |
| Weight incl. all conductors | see guide [ gram ] |
| Weight without power conductors | 300 [ gram ] |
| Dimensions with external capacitor | see guide [ mm ] |
| Dimensions | see guide [ mm ] |
| Max RPMs | 250.000 |
| On-state switch (FETs) resistance at 25 °C | 2 × 0.8 [ mW ] |
| Motor PWM frequency | 8 – 32 [ kHz ] |
| Number of regulation steps | 2048 |
| BEC short circuit protection | No |
| Max. BEC current at 25 °C | No |
| Switching HV-BEC voltage | No |
| Switching S-BEC voltage | No |
| Available BEC / OPTO versions | OPTO |
| Max. peak current (peak 5 sec.) | 360 [ A ] |
| Max. continuous current (for full throttle) | 250 [ A ] |
| Operating voltage | 12 – 63 [ V ] |
| Compatible with all types of feeding cells | Yes |
| Number of A123 feeding cells | 5 – 17 |
| Number of NiCd, NiMh feeding cells | 15 – 44 |
| Number of Li-Pol, Li-Ion feeding cells | 4 – 15 |
| “One-way” mode | Yes |
| Possibility of setting current limits | Yes |
| Possibility of setting RPM limits (motor protection) | Yes |
| Possibility of motor temperature measuring (motor protection) | Yes |
| Possibility of cells temperature measuring (cells protection) | Yes |
| 4 Memory Banks | Yes |
| 32-BIT SYSTEM | Yes |
| Automatic Sensor Setting | Yes |
| Possibility of operation also with sensors motors | Yes |
| Real-time Monitoring (PC or other device) | No |
| Telemetry (real-time back data transfer) | Yes |
| Internal Data Logger (data recorder) | Yes |
You must be logged in to post a review.
Reviews
There are no reviews yet.